Betofix R2

Concrete surface:
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depth

Reinforcement:
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2

Pre-wet the substrate so that it is slightly moist.

Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

Working time
(+20 °C): approx. 20 minutes

Layer thickness

One layer 1 - 10 mm
Two layers < 20 mm, apply wet on wet
< 100 mm in broken-out areas

Applying corrosion protection:

Apply two layers of slurry with a thickness of min. 1 mm each, making sure the entire surface is covered.

Waiting time between layers: approx. 30 minutes.

Subsequent processing

Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.

Mixing tool, paintbrush, filling knife, trowel, smoothing trowel, sponge float, plasterer’s float

Clean tools with water while the material is still fresh.

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

Approx. 1.4 kg/m²/mm layer thickness

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.