Clean WR

Mechanically remove coarse soiling.

Pre-wet the substrate being cleaned with water.

Temperature of material, surroundings and substrate min. +5 °C up to max. +30 °C

Apply the material using suitable equipment.

Work in the material using a scrubbing brush.

Re-wash after sufficient reaction time.

Treat large surfaces with hot water pressure or steam-jet degreaser.

If needed, repeat the application.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

Set up the necessary collection receptacles.

Cleaner residue may lead to lime sinter.

Dark joints may be lightened by cleaning.

Srubbing brush, mop, high-pressure cleaner, steam-jet degreaser

Clean tools with water immediately after use.

At least 36 months in unopened, original containers stored cool, dry and protected from frost.

Approx. 0.3 - 0.5 l/m², depending on the degree of contamination

Apply to a large enough trial area to determine the precise amount required.

The material only dissolves impurities containing lime and not any other dirt deposits.

The applicable regulations and legal requirements must be observed.

The relevant test certificates must be observed when planning and carrying out work.

Always set up a trial area/trial areas first.

Dispose of larger quantities of leftover product in the original container in compliance with valid regulations. Completely empty containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.