Article No. 388001
E-glass reinforcement fabric covered with polymeric plastics
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Absorption of movements of the substrate
- Crack repair
- Composite thermal insulation systems
- Reinforcement of the iQ Top SLS and Power Protect [eco] systems
Properties
- Permanently elastic
- Rot-proof
- Alkali-resistant
- Non-slip
- W: 1 m / L: 50 m
-
Application
-
Stapling
Staple the fabric on the sanded, vacuumed wood planks after priming the substrate and allowing to dry. Staple approx. 6 times per m².
Overlapping zone ≥ 10 cm lengthwise and crosswise.
Adhesive bonding
Push the fabric into the coating mass over its entire area.
Overlapping zone ≥ 10 cm lengthwise and crosswise.
-
-
Storage / shelf life
-
Store upright in original container in a dry place.
-
-
Usage
-
Approx. 1.1 m²/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
