Betofix R4 EM

Concrete surface:
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depth

Pre-wet the substrate so that it is slightly moist.

Reinforcement:
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2

Processing time
(+20 °C): approx. 90 minutes

Layer thickness

Single layer thickness < 80 mm

Layer thickness in breakouts up to max. 100 mm

In the case of bonded screeds, apply the product while the bonding layer is still wet.

Subsequent processing

Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.

Machine working

Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

Mixing tool, trowel, aluminium rule, finishing trowel, power trowel

Clean tools with water while the material is still fresh.

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

Approx. 2.0 kg/m²/mm layer thickness, or 2.0 kg/dm³

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.