Epoxy Wood Substitution Compound

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Before applying the product, prime the damaged areas of wood that are to be repaired with Remmers Epoxy Wood Strengthener. The wood substitution compound must be applied while the previous coating is freshly applied and still tacky.

Temperature of the material, air and substrate: from min. +10 °C to max. +25°C

Use clean tools to apply the mixed wood substitution compound within the specified pot life, compact it thoroughly and smooth it off.
To smooth the surfaces, clean tools thoroughly and wet with Thinner V 101 to prevent drips from forming.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

If shuttering aids are used, PE film must be used as a release agent.

Ready for next coat: after approx. 24 hours

Scraper, trowel, stainless steel smoothing tool

Clean tools immediately after use with V 101 Thinner.

The material can no longer be cleaned off once it has dried or hardened.

Ensure that any residue from cleaning is disposed of correctly.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

0.93 kg/m² per mm layer thickness; corresponds to 0.93 kg per litre volume

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.