Article No. 091901
Corrosion inhibition additive for Betofix RM/Betofix R2
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Interior and exterior use
- Protects against corrosion
- System component for Betofix RM + Betofix R2
Properties
- Active anti-rust pigments
- Highly water-repellent
- Alkali-resistant
- Certified in accordance with DIN EN 1504-7
- Basic test according to SIB guideline in Betofix RM system
-
Preparation
-
Substrate requirements
Clean, dust-free and capable of supporting a load.
-
Preparations
Reinforcement:
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2
-
-
Application
-
Apply two layers of slurry with a thickness of min. 1 mm each, making sure the entire surface is covered.
Waiting time between layers: approx. 30 minutes.
Follow-up work must be carried out wet ond wet.
-
-
Application instructions
-
Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.
-
-
Working tools / cleaning
-
Mixing tool, brush
Clean tools with water while the material is still fresh.
-
-
Storage / shelf life
-
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
-
-
Usage
-
Applied in 2 coats, per m² steel surface area approx. 0.9 kg S-Protect M and 2.3 kg material
-
-
General information
-
The mixing water must be of drinking water quality.
The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
